Skip to main content

Printronix Printer properties

The following are the Printronix printer properties:

  1. Company Name : It displays the name of the Manufacturer.

    • Value: Printronix.

  2. Model : It displays the Printer model number.

  3. Print Server Name : It displays the Hostname/IP name of the onboard PrintNet server.

  4. Program File : It displays the current firmware program file name.

  5. DC Part Number : It displays the hardware part number for the document control/drive controller.

  6. Boot Part Number : It displays the Bootloader firmware part number.

  7. Serial Number : It displays the Printer’s unique serial number.

  8. Flash Size : It displays the Total Flash memory for firmware/files.

    • Values are displayed in Megabytes(MB)

  9. DRAM Size : It displays the working memory space.

    • Values are displayed in Megabytes(MB)

  10. Head Resolution : It displays the Print head DPI.

    • Values are in Dots per Inch (DPI)

  11. Ethernet Version : It displays the Network Interface Card’s (NIC) speed and specifications.

  12. Printer On Time : It displays the cumulative operational uptime since commissioning.

    • Values are in Hours

  13. Total Label Count : It displays the total number of labels printed.

  14. Head On Time : It displays the time print head has been active.

    • Values are in Hours

  15. Head Life : It displays the remaining estimated lifespan of a print head.

    • Values are in Percentage.

  16. Ribbon Percent : It displays the estimated ribbon supply remaining.

    • Values are in Percentage.

  17. Total Media Distance : It displays the length of media consumed (printing+calibration).

    • Values are in Inches/mm

  18. Head Print Distance : It displays the cumulative print head travel distance.

    • Values are in Inches/mm

  19. Display LAN : It displays the language used for text shown on the printer's control panel or display screen.

  20. Power Up State : It displays the printer’s behavior on the power-cycle.

    • Values are Online/Offline.

  21. Power Up Config : It displays which saved configuration is loaded on startup.

  22. Media Units : It displays the Measurement units for media settings.

    • Values are In Inches, In Millimeters

  23. Set Config : It displays the currently selected memory/configuration slot.

  24. Save Config : It Indicates whether current settings are saved to non-volatile memory.

  25. ASCII Data Port Set : It displays the Serial port ASCII configuration.

    • Ranges are: 1025 - 65535

  26. Subnet Address Set : It displays the Subnet mask configured.

    • Format: 4 segments, 0 - 255 each
note

Not settable, if DHCP is enabled.

  1. Gateway Address Set : It displays the Default gateway configured.
    • Format: 4 segments, 0 - 255 each
note

Not settable, if DHCP is enabled.

  1. DHCP Set : It is a toggle button determining the IP assignment method.

    • It can be enabled/disabled.

  2. Active Interface : It displays the Current network interface.

    • Values are: Automatic, Ethernet and WLAN

  3. Fully Qualified Domain Name : It displays the Printer’s Fully Qualified Domain Name (FQDN), if DNS configured.

  4. Active IP Address : It displays the assigned IP via DHCP/static.

  5. PPING Set : It displays the Ping-response option on Network Interface Card (NIC).

    • Values are: Enable/Disable.

  6. Menu Lock : It is a toggle button for the printer UI locking status.

    • Values are: True/False

  7. Print Intensity : It displays the darkness calibration of print output.

  8. Print Mode : It displays the print quality mode.

    • Values are: Transfer, Direct

  9. Label Rotation : It displays the Print orientation.

    • Values are: Portrait, Landscape, Inv. Portrait, Inv. Landscape

  10. Print Speed :It displays the Labels-per-minute or inch/sec.

    • Values are: ips or mm/sec

  11. Label Length : It displays the set length of label in chosen units.

    • Values are in inches/mm

  12. Label Width : It displays the width of label media.

    • Values are in inches/mm

  13. Gap Mark Sensor : It displays the sensor type for detecting media gaps or marks.

    • Values are: Disable, Mark, Gap, Advanced Gap, Advanced Notch

  14. Display Line 1 : It displays the custom message on the operator panel.

  15. Display Line 2 : It displays the custom message on the operator panel.

  16. MQTT Server Address : It displays the MQTT broker hostname/IP.

  17. MQTT Port : It displays the Broker port.

    • Values are: 1883, 8883, 1025 - 65535

  18. MQTT User : It displays the credentials for MQTT broker connection.

    • Values are: Up to 32 ASCII Characters

  19. MQTT Password : It displays the credentials for MQTT broker connection.

    • Values are: Up to 32 ASCII Characters

  20. Tenant ID : It displays the Unique ID of the console.

    • Values are: Up to 32 ASCII Characters

  21. MQTT TLS : It displays whether TLS is used.

    • Values are: True/False

  22. Use for File Store : It displays whether MQTT is used to store files/logs.

    • Values are: True/False

  23. RFID Installed : It displays the RFID encoder presence.

    • Values are: True/False

  24. Bluetooth Installed : It displays the Bluetooth module presence.

    • Values are: True/False

  25. WLAN Installed : It displays the wireless Network Interface Card (NIC) presence.

    • Values are: True/False

  26. ODV Installed : It displays the ODV (Optical Data Verification) module.

    • Values are: True/False

  27. Cutter Installed : It displays if an Auto cutter option present.

    • Values are: True/False

  28. Peeler Installed : It displays if a Label-peeler mechanism present.

    • Values are: True/False

  29. QCMC Installed : It displays if QCMC (Quad Combination Module) is installed.

    • Values are: True/False

  30. HTTP Set : It displays the HTTP configuration status.

    • Values are: HTTP, HTTPS, Disable

  31. FTP Set : It displays the FTP server access enabled/disabled.

    • Values are: FTP, FTPS, Disable

  32. Telnet Set : It displays the Telnet interface status.

    • Values are: True/False

  33. SNMP Set : It displays the SNMP agent enabled.

    • Values are: True/False

  34. EAP Mode : It displays the Security protocol for WLAN.

    • Values are: None, LEAP, PEAP, TTLS, TLS

  35. NTP Timezone : It displays the Configured time zone for Network Time Protocol (NTP).